Majorlift 3 Wheel Electric Forklift, 4400 lb Capacity, MD20E
General
The MAJORLIFT MD20E 4400 lbs three-wheel electric forklift adopts the latest technologies and ergonomics concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.
Electrical syste
The CURTIS AC controller with microprocessor control system of the motor speed and temperature feedback signal, regenerative braking and CANBAUA universal interface to ensure the accurate control of driving and lifting system. The regenerative braking can capture and reserve energy while braking.
The subsidiary pump motor controller will put into operation by the system automatically while lifting in need of the high flow oil pressure, this will avoid the extra energy consumption and extend battery life.
The emergency power disconnect switch is within easy reach while emergency events
Multifunctional display provides extensive information on truck operation and maintenance state, it with waterproof and shock proof protection. The advanced wiring harness, waterproof connectors and multiunit fuse module ensure the security and reliability of the circuit.
Driving and transmission system
Full suspension type of semi-axis for the driving axle, and it only bear the torque and other load is born by the outside case.
TCM technology transmission with floating system highly reduces the forklift vibration and noise.
Hydraulic system
The high-quality hydraulic components and rational distribution of the pipes helps to control the oil pressure and highly improved the forklift performance.
Steering and brake system
Steering axle adopts up and down type steering rod, with simple structure and better intensity and it’s both ends adopt joint bearing, enhancing the installation hole of joint bearing. The performance of steering axle is more reliable.
TCM technology brake system which is sensitive and light full hydraulic with a better performance braking.
Features:
• MPN: MD20E
• Load Capacity 4400 lb (2000 kg)
• Raised Height 189″ (15.75ft)
• Triple Mast
• 4 Spool Control Valve
• Side-Shifter with Fork Positioner
• Fork Size 42.3″ x 3.9” x 1.6”
• Curtis Controller
• Tilt 4/6 Degree
• Free Lift
• AC Drive Motor and Lift Motor
• Front Wheel Dual Drive Motor
• Lead Acid Battery 48V/600Ah
• Solid Wheels
• Ergonomic Handle and Controls
• EPS (Electronic Power Steering)
• Steel Construction
• Back up Handle with Horn
• LED Working Light
• Blue Light
• Side View Mirror
• Tow Pin
• Robotic Welding
• Charger Included
• Batteries Included
• 3 Years Limited Warranty
SPECIFICATIONS:
GENERAL DATA | MD16E | MD18E | MD20E | |||
Load Capacity | lb (kg) | 3500 (1600) | 4000 (1800) | 4400 (2000) | ||
Load Center | lb (kg) | 19.7 (500) | 19.7 (500) | 19.7 (500) | ||
Power Type | Lead Acid Battery | Lead Acid Battery | Lead Acid Battey | |||
Operator Type | Seated | Seated | Seated | |||
Tire Type | Pnuematic | Pnuematic | Pnuematic | |||
Wheel (x=driven) | Front/Rear | 2x / 2 | 2x / 2 | 2x / 2 | ||
EXTERIOR DIMENSIONS | ||||||
A Lift Height (top of forks) | in (mm) | 189 (4800) | 189 (4800) | 189 (4800) | ||
B Mast Lowered Height | in (mm) | 78.5 (1994) | 78.5 (1994) | 78.5 (1994) | ||
C Mast Extended Height | in (mm) | 228 (5791) | 228 (5791) | 228 (5791) | ||
C Free Lift | in (mm) | 46 (1170) | 46 (1170) | 46 (1170) | ||
E Load Distance | in (mm) | 13 (330) | 13 (330) | 13 (330) | ||
F Wheelbase | in (mm) | 55 (1397) | 55 (1397) | 55 (1397) | ||
G Fork Size (T x W x L) | in | 1.8 x 4 x 42 | 1.8 x 4 x 42 | 2 x 5 x 42 | ||
mm | 45 x 100 x 1070 | 45 x 100 x 1070 | 50 x 125 x 1070 | |||
H Length to Fork Face | in (mm) | 76 (1930) | 76 (1930) | 76 (1930) | ||
I Overhead Guard Height | in (mm) | 84 (2134) | 84 (2134) | 86 (2184) | ||
J Tilt Range (forward / backward) | deg° | 4/6 | 4/6 | 4/6 | ||
K Turning Radius (outside) | in (mm) | 65 (1651) | 65 (1651) | 65 (1651) | ||
L Overall Width | in (mm) | 49.2 (1250) | 49.2 (1250) | 49.2 (1250) | ||
M Carriage Width | in (mm) | 36 (914) | 36 (914) | 36 (914) | ||
N Tread Width | Front | in (mm) | 35 (889) | 35 (889) | 35 (889) | |
Rear | in (mm) | 6.9 (175) | 6.9 (175) | 6.9 (175) | ||
PERFORMANCE DATA | ||||||
Travel Speed | Load | mph (km/h) | 7.5 (12.1) | 7.5 (12.1) | 7.5 (12.1) | |
Unload | mph (km/h) | 8.0 (12.9) | 8.0 (12.9) | 8.0 (12.9) | ||
Lifting Speed | Load | in/s (mm/s) | 10.3 (260) | 10.3 (260) | 10.3 (260) | |
Unload | in/s (mm/s) | 14.5 (370) | 14.5 (370) | 14.5 (370) | ||
Lowering Speed | Load | in/s (mm/s) | 20.8 (528) | 20.8 (528) | 20.8 (528) | |
Unload | in/s (mm/s) | 22.5 (572) | 22.5 (572) | 22.5 (572) | ||
Drawbar Pull | Load | 5 Min. Rating | lb (kg) | 2560 (1162) | 2560 (1162) | 2520 (1143) |
Unload | 5 Min. Rating | lb (kg) | 2540 (1152) | 2540 (1152) | 2540 (1152) | |
Gradeability | Load/Unload | % | 22/25 | 22/25 | 22/25 | |
TRUCK WEIGHTS | ||||||
Total Weight | lb (kg) | 7110 (3180) | 7353 (3290) | 7552 (3380) | ||
Axle loading | Front Load | lb (kg) | 10950 (4966) | 10950 (4966) | 11050 (5012) | |
Rear Load | lb (kg) | 1575 (715) | 1575 (715) | 1590 (721) | ||
Front UnLoad | lb (kg) | 4730 (2145) | 4730 (2145) | 4810 (2182) | ||
Rear Unload | lb (kg) | 4870 (1676) | 4870 (1676) | 4950 (2245) | ||
TIRES | ||||||
Tires | Number (front/rear) | 2 / 2 | 2 / 2 | 2 / 2 | ||
Size | Front | in | 18 x 7 x 12 | 18 x 7 x 12 | 18 x 7 x 12 | |
mm | 457 x 178 x 305 | 457 x 178 x 305 | 457 x 178 x 305 | |||
Rear | in | 15 x 5 x 11 | 15 x 5 x 11 | 15 x 5 x 11 | ||
mm | 381 x 127 x 279 | 381 x 127 x 279 | 381 x 127 x 279 | |||
Brake | (Service/Parking) | Type | Hydraulic | Hydraulic | Hydraulic | |
POWER SYSTEM | ||||||
Drive Motor (AC) | KW | 2 | 2 | 2 | ||
Lifting Motor (DC) | KW | 10.5 | 10.5 | 10.5 | ||
Battery Voltage | V / Ah | 48/600 | 48/600 | 48/600 | ||
Steering System | Type | Hydraulic | Hydraulic | Hydraulic |